Operation; Real-Time Data - Seametrics LevelSCOUT Instructions Manual

OPERATION

LEVELSCOUT INSTR

Real-time Data

Connect to sensor and select the Real-time data tab
To start real-time readings click Start, readings default to table view. To switch to Real-time
graphing view click the graph icon
Real-time readings default to a 1 second interval for 1 minute, to adjust enter your desired
settings here:
To save this data to the Reports section click the button located next to the Single
button in the Real-Time tab. This will permanently save this real-time data set to your
Reports database.
Seametrics • 253.872.0284 Page 19 seametrics.com