Operation; Real-Time Data - Seametrics CT2X Instructions For Use Manual

OPERATION

Real-time Data

Connect to sensor and select the Real-time data tab
To start real-time readings click Start, readings default to
table view
To switch to Real-time graphing view click the
icon
Real-time readings default to a 1 second interval for 1
minute, to adjust enter your desired settings here:
Seametrics • 253.872.0284
To save this data to the Reports section click the
button located next to the Single button in the Real-Time
tab. This will permanently save this real-time data set to
your Reports database.
graph
Page 16
CT2X INSTRUCTIONS
seametrics.com