Program Settings - Seametrics LevelSCOUT Instructions Manual

SETTINGS AND CALIBRATION

Program Settings

To view/change Aqua4Plus 2.0 settings click
Under the General Settings tab you can change the default data folder location. This is
where your Reports are saved to on your PC.
The Zoom Factor slider can be used to adjust the font size within Aqua4Plus 2.0.
Uncheck the Allow app to collect anonymous usage statistics box if you would like to
opt out. This information is used to track Aqua4Plus 2.0 reliability across different system
configurations.
Under the Display Units tab you can select your desired display units for the supported
channels. These may be changed at any time and associated Real-Time readings and
Reports will rescale to the currently selected display unit. To change Direct Read units
scaling see Sensor Settings.
Seametrics • 253.872.0284
in the blue side-bar menu.
Page 13
LEVELSCOUT INSTR
seametrics.com