Operation; Real-Time Data; Data Logging - Seametrics TempHion Instructions Manual

OPERATION

Real-time Data

Connect to sensor and select the Real-time data tab
To start real-time readings click Start, readings default to
table view. To switch to Real-time graphing view click the
graph icon
Real-time readings default to a 1 second interval for 1
minute, to adjust enter your desired settings here:
To save this data to the Reports section click the
located next to the Single button in the Real-Time tab.
This will permanently save this real-time data set to your
Reports database.
Seametrics • 253.872.0284

Data Logging

Select Set Up Logging from the sensor screen. If there
are no files currently on the sensor you'll see the Set Up
Logging button active under the Data Files tab as well as in
the upper menu. Once files have been started/logged on
the sensor they will be displayed under the Data Files tab.
Set Up Logging Window
Here you will name your data file and set up the recording
interval and duration of each logging phase. Select your
desired recording interval and duration for each phase,
Aqua4Plus 2.0 will display the available memory at the
bottom of the window.
button
Page 15
TEMPHION INSTRUCTIONS
seametrics.com