Sawing - Meec tools Multi Series Operating Instructions Manual

EN
Setting the cutting depth
Adjust the cutting depth to the thickness of the workpiece. At the correct setting, the blade's teeth
should extend approximately 3 mm below the underside of the workpiece.
1. Loosen the depth adjustment lock knob.
2. Adjust the bottom plate to the required depth according to the depth scale, or measure with
a ruler, and tighten the lock knob.

SAWING

NOTE:
• Always use both hands to grip the handles when using the circular saw.
• Secure the workpiece with a clamp, clips or vice.
• Practise on some waste material to get a feel of the circular saw before processing the
actual workpiece.
64