Meec tools Multi Series Operating Instructions Manual page 53

• If dust extraction and dust collection equipment is available, this should be
connected and used correctly. The use of such devices can reduce the risk of
dust-related problems.
Use and care
• Do not force the tool. Use the correct power tool for the planned work. The tool
does the job better and safer when used at the rate for which it was designed.
• Do not use the tool if it cannot be switched on and off with the power switch.
Power tools that cannot be controlled with the power switch are dangerous
and must be repaired.
• Remove the battery before making any adjustments, changing accessories or
putting the power tool away. These safety precautions reduce the risk of
accidentally starting the tool.
• Store power tools out of the reach of children when not in use. Never allow
children, or anyone who is unfamiliar with the tool and these instructions, to
use the tool. Power tools are dangerous if used by inexperienced persons.
• Keep the power tool properly maintained. Check that moving parts are properly
adjusted and do not jam, and that no parts are incorrectly fitted or damaged.
Check for other factors that could affect functionality. If the tool is damaged, it
must be repaired before being used again. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to jam and are easier to control.
• Use the tool, accessories, etc., in accordance with these instructions, taking into
account the actual working conditions and the work that is to be done. It can
be dangerous to use power tools for purposes other than those they are
intended to be used for.
Battery-powered tool use and care
• The battery must only be charged with the charger recommended by the
manufacturer. A charger intended for one type of battery can result in a fire risk
if used with another type of battery.
• Only use power tools with the specified batteries. The use of other batteries can
cause accidents or a fire.
• When the battery is not being used it must be kept away from other metal
objects such as paper clips, coins, keys, nails, screws and other metal objects
that can short circuit the terminals. Short circuiting the battery terminals can
cause burns or a fire.
EN
53