1.5.5 Paper Low
There are 4 paper low detection options. Paper low sensor 1 is only used when paper
low sensor 2 is in the off position.
Detection quantity (sheets)
To change the paper low detection quantity. Turn the printer on its left side and remove
the sensor cover. Using the alignment pins, place the sensor in the desired position.
Then reinstall the sensor cover
Document # 720009-0000
October 18, 2017
Paper low 2 position
1
50
35
15
Table 6: Paper low
Figure 12: Paper low
Technicians Manual
OFF
HIGH
MEDIUM
LOW
10