Mitsubishi Electric VS20M-11F310 Connection Manual page 48

3.
Set the SLMP Scanner.
Ò
• SLMP response from a programmable controller may be delayed due to online operation to the
programmable controller, etc., making connections disconnected in some cases. Ensure a sufficient margin
for the timeout time.
• Shortening the poll interval also shortens the interval to monitor the programmable controller status.
Assigning devices
Ò
■Device addressing
Name
Control
Status
Output Block
2 SLMP SCANNER CONNECTION
46
2.3 Setting the Vision Sensor
Ó
Selected Device
D-Data Register
D-Data Register
D-Data Register
Offset
1000
1002
1010
 Setting contents are as follows.
• Controller Type: iQ-R/Q/L Series
(3E Frame)
• IP Address: 192.168.3.2
• Host Port: 12289 (Port number set
for the Ethernet parameter in GX
Works3)
• Timeout (ms): 1000
• Poll interval (ms): 100
 Select the [Device Addressing] tab.
 Set a selected device, offset, and
the number of devices to each of the
six data blocks as shown left.
(Page 46 Device addressing)
Number of Devices
2
2
8