Mitsubishi Electric VS20M-11F310 Connection Manual page 63

Parameter items need to be added to the list in the [Format Input Data] tab in advance to change parameter
values.
More than one parameter item can be selected.
Set the number of devices of "Input Block", depending on the number and size of parameters.
When the number entered in "Number of devices" is smaller than the total size of the parameter items added
to the list in the [Format Input Data] tab, a warning mark is displayed next to "Message size (words)".
4.
Set "Pattern_1.Rotation Tolerance" as a parameter to be changed.
Set a device value in the "Device/Buffer Memory Batch Monitor" window in GX Works3.
Ò
5.
Change parameter values.
Ò
6.
Trigger a device.
Ô
Ó
Ô
Ò
 Enter 'D2000' for "Device Name".
 Click the [Start Monitoring] button.
 Enter '90' for 'User Data' (D2002) of
Ó
an input word block.
 Enter 'D1000' for "Device Name".
 Turn ON 'Set User Data' (D1001.0)
of a control bit block.
 By completing the settings, 'Set
User Data Ack' (D1003.0) of a status
bit block turns ON. After that, Turn
OFF 'Set User Data' (D1001.0).
 Turn ON 'Trigger' (D1000.1) of a
control bit block.
2 SLMP SCANNER CONNECTION
2.6 Checking Operations
2
61