Remote I/O Signals (Rx/Ry); Remote Registers (Rwr And Rww) - Mitsubishi Electric VS20M-11F310 Connection Manual

Remote I/O signals (RX/RY)

The following shows the I/O signals for a master station (programmable controller) in a CC-Link IE Field Network Basic
connection.
The I/O signal assignment in the following tables is an example when the remote I/O signals of a vision sensor are assigned
for RX0 to RX3F and RY0 to RY3F.
For details on each data, refer to the help of In-Sight Explorer.
• Remote output (RY)
Remote output (RY) is a signal that is sent to a vision sensor from a mater station (programmable controller) used for the CC-
Link IE Field Network Basic connection.
RY7 RY6
Set Offline Reserved
RYF RYE
Reserved
RY17 RY16
Reserved
RY1F RY1E
Soft Event 7 Soft Event 6
RY20..RY3F
User Data (Bit Area)
• Remote input (RX)
Remote input (RX) is a signal that is sent to a mater station (programmable controller) from a vision sensor used for the CC-
Link IE Field Network Basic connection.
RX7 RX6
Online Offline Reason
RXF RXE
Error Command Failed
RX17 RX16
Reserved
RX1F RX1E
Soft Event Ack 7 Soft Event Ack 6
RX20..RX3F
Inspection Results (Bit Area)

Remote registers (RWr and RWw)

The following shows the remote registers (RWr and RWw) used for the CC-Link IE Field Network Basic connection.
• Remote register (RWr)
RWr0 RWr1
Current Job ID Error Code
• Remote register (RWw)
RWw0
Command
RY5 RY4
Execute
Command
RYD RYC
RY15 RY14
RY1D RY1C
Soft Event 5 Soft Event 4
RX5 RX4
RXD RXC
Command Command
Completed Executing
RX15 RX14
Job Pass
RX1D RX1C
Soft Event Ack 5 Soft Event Ack 4
RWr2
Acquisition ID
1.2 Basic Operations for a CC-Link IE Field Network Basic Connection
RY3 RY2
Inspection Buffer Results
Results Ack Enable
RYB RYA
RY13 RY12
Clear Exposure Clear Error
Complete
RY1B RY1A
Soft Event 3 Soft Event 2
RX3 RX2
Missed Acq Reserved
RXB RXA
Results Valid Results Buffer
Overrun
RX13 RX12
Exposure Reserved
Complete
RX1B RX1A
Soft Event Ack 3 Soft Event Ack 2
RWr3 RWr4
Inspection ID Inspection Result Code
RWw1..
User Data
1 CC-Link IE Field Network Basic CONNECTION
RY1 RY0
Trigger Trigger Enable
RY9 RY8
RY11 RY10
Reserved Set User Data
RY19 RY18
Soft Event 1 Soft Event 0
RX1 RX0
Trigger Ack Trigger Ready
RX9 RX8
Inspection System Busy
Completed
RX11 RX10
Reserved Set User Data
Ack
RX19 RX18
Soft Event Ack 1 Soft Event Ack 0
RWr5..
Inspection Results
1
11