Table of Contents
Advertisement
1
CC-Link IE Field Network Basic CONNECTION
This chapter explains the procedure for connecting a vision sensor VS20 to a programmable controller and controlling the
vision sensor with CC-Link IE Field Network Basic connection.
For details on CC-Link IE Field Network Basic, refer to the following manual.
CC-Link IE Field Network Basic Reference Manual
1.1
System Configuration Example for Connecting a
Vision Sensor
The following figure shows the system configuration for connecting a vision sensor VS20.
(8) Ethernet cable
(8) Ethernet cable
(7) Switching
hub
(5) Ethernet cable
(COGNEX product)
CC-Link IE Field Network Basic connection is available for other vision sensors (VS70 and VS80).
For details on the system configuration, refer to the user's manual of the vision sensor used.
(2) Programmable controller
(1) Vision sensor
(6) Breakout cable
1.1 System Configuration Example for Connecting a Vision Sensor
(3) Engineering tool, Profile
(4) Vision sensor setup tool
(10) 24 VDC
power supply
1 CC-Link IE Field Network Basic CONNECTION
(9) USB cable
100 V power supply
1
7
Hide quick links:
Advertisement
Table of Contents
