BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the gearbox housing [applies to: BOP 13-2 (A)]
1
1. Insert the switch pushbutton (1).
2. Insert the plate (2).
3. Press on the grooved ball bearing (3).
4. Fill the gearbox housing (4) with 25 g of grease.
C-SC_CSSM
Version 1.0
2
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
4
Tools:
- Arbor press
- Sleeve
6 mm inner diameter
20 mm outer diameter
- Grease
Page 62 of 65