Fein BOP 6 Repair Instructions page 48

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the gearbox housing [applies to: BOP 10 (A)]
1. Press on the gear wheel (1).
2. Press in the grooved ball bearing (2).
C-SC_CSSM Version 1.0
1
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
2
Tools:
- Arbor press
- Sleeve
6 mm inner diameter
20 mm outer diameter
Page 48 of 65