Fein BOP 6 Repair Instructions page 30

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the carbon brushes and carbon brush holders
1
1. Remove the two cables (1).
2. Lift the spring (2) to one side [on both sides].
3. Disconnect the connection cable (3) on both sides.
4. Remove the carbon brush on both sides.
5. Unscrew the screws (4).
6. Remove the carbon brush holders (5).
C-SC_CSSM Version 1.0
3
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2
4
5
.
5
Tools:
- PH2 cross-tip
screwdriver
- Assembly aid
Page 30 of 65