Fein BOP 6 Repair Instructions page 32

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the armature
1
1. Press out the armature (1).
2. Pull off the grooved ball bearing (2).
3. Pull off the grooved ball bearing (3).
4. Remove the seal (4).
5. Remove pin (5).
C-SC_CSSM Version 1.0
2
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
4
3
.
5
Tools:
- Drawing-off socket cap
- Chuck cone, 17 mm
diameter
- Chuck cone, 19 mm
diameter
- Punch, 7 mm diameter
- Sleeve
55 mm inner diameter
65 mm outer diameter
Page 32 of 65