BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the gearbox housing [applies to: BOP 6 (A)]
1. Press on the grooved ball bearing (1).
2. Fit the circlip (2).
Replace the circlip during each fitting.
3. Place the disc (3) in the correct position.
Its flat side should be facing the grooved ball bearing.
C-SC_CSSM
Version 1.0
1
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
2
.
Tools:
- Arbor press
- Circlip pliers
Page 42 of 65