Fein BOP 6 Repair Instructions page 39

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the electronics
2
1
1. Slide the cable grommet (1) onto the cable (2).
2. Connect the cable and the capacitor to the speed setting switch (3).
 See "Connection diagram".
3. Fit the toggle switch (4) to the speed setting switch.
C-SC_CSSM Version 1.0
3
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
4
.
Tools:
- PH1 cross-tip
screwdriver
Page 39 of 65