Fein BOP 6 Repair Instructions page 16

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the gearbox housing [applies to: BOP 10 (A)]
1
1. Press down on the grooved ball bearing (1).
2. Press the gear-wheel [z = 30 mm] (2) down.
C-SC_CSSM Version 1.0 2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2
.
Tools:
- Arbor press
- Sleeve
12 mm inner diameter
30 mm outer diameter
Page 16 of 65