Fein BOP 6 Repair Instructions page 45

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the gearbox housing [applies to: BOP 6 (A)]
1
1. Position the spring washer (1).
2. Place the gear-wheel [z = 43] (2) in the correct position.
3. Fit the circlip (3).
 Replace the circlip during each fitting.
4. Press on the grooved ball bearing (4).
5. Fill the gearbox housing (5) with 12 g of grease.
C-SC_CSSM Version 1.0
2
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
4
.
5
Tools:
- Arbor press
- Sleeve
6 mm inner diameter
20 mm outer diameter
- Grease
Page 45 of 65