Fein BOP 6 Repair Instructions page 22

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the gearbox housing [applies to: BOP 13-2 (A)]
1
1. Remove the circlip (1).
2. Press down on the grooved ball bearing (2).
C-SC_CSSM Version 1.0
2
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Tools:
- Circlip pliers
- Arbor press
- Sleeve:
20 mm inner diameter
28 mm outer diameter
Page 22 of 65