Fein BOP 6 Repair Instructions page 36

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the motor housing
1
1. Remove the cables (1) from the stator.
2. Use the two screws (2) to fasten the stator [1 Nm +0.4 Nm].
3. Insert the air guide ring (3).
4. Push the armature (4) into the housing.
C-SC_CSSM Version 1.0
2
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
4
Tools:
- Assembly aid
- PH2 cross-head
screwdriver
Page 36 of 65