Fein BOP 6 Repair Instructions page 11

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the gearbox housing [applies to: BOP 6 (A)]
1
2
1. Remove the clutch ring (1).
2. Remove the six rollers (2).
3. Remove the circlip (3).
4. Press out the shaft (4).
C-SC_CSSM Version 1.0 2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
4
3
.
Tools:
- Arbor press
- Sleeve
33 mm inner diameter
43 mm outer diameter
Page 11 of 65