Fein BOP 6 Repair Instructions page 46

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
Fitting the gearbox housing [applies to: BOP 10 (A)]
1. Press on the grooved ball bearing (1).
2. Fit the circlip (2).
 Replace the circlip during each fitting.
3. Place the disc (3) in the correct position.
 Its flat side should be facing the grooved ball bearing.
C-SC_CSSM Version 1.0
1
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2 3
.
Tools:
- Arbor press
- Sleeve
12 mm inner diameter
15 mm outer diameter
Page 46 of 65