Fein BOP 6 Repair Instructions page 23

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the gearbox housing [applies to: BOP 13-2 (A)]
1
1. Pull off the grooved ball bearing (1).
2. Press down on the gear-wheel (2).
C-SC_CSSM Version 1.0 2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2
.
Tools:
- Drawing-off socket cap
- Chuck cone, 15 mm
- Arbor press
- Sleeve:
12 mm inner diameter
26 mm outer diameter
Page 23 of 65