Fein BOP 6 Repair Instructions page 15

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the gearbox housing [applies to: BOP 10 (A)]
1
1. Press out the shaft (1).
2. Remove the disc (2).
3. Remove the circlip (3).
C-SC_CSSM Version 1.0 2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2 3
.
Tools:
- Arbor press
- Sleeve
30 mm inner diameter
40 mm outer diameter
- Circlip pliers
Page 15 of 65