Fein BOP 6 Repair Instructions page 19

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
Removing the gearbox housing [applies to: BOP 13-2 (A)]
1
1. Pull off the ball bearing (1).
2. Remove the circlip (2).
3. Remove the gear-wheel (3) with the spring washer.
C-SC_CSSM Version 1.0
2
2017-10-12 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
3
.
Tools:
- Drawing-off socket cap
- Chuck cone, 15 mm
- Circlip pliers
Page 19 of 65