Change Of Patient; Function Check; Intervals; Procedure - Weinmann Homecare NP15 Instructions For Use Manual

5.5 Change of patient

1. Dismantle mask.
2. Wash mask in hot water using a mild
detergent (e.g. washing-up liquid) so
that no residues remain before disin-
fecting or sterilizing.
3. Subject mask to a hygiene treatment
(see table).
4. Use new headgear.

6 Function check

6.1 Intervals

Perform a function check after every hy-
giene treatment.

6.2 Procedure

If the forehead cushion becomes
discolored, this does not affect its
function.
1. Check all parts for soiling and damage.
Replace parts if necessary.
2. In the event of leaks due to damage,
replace the nasal pillow.
20
EN

7 Servicing

The mask requires no servicing.

7.1 Storage

The mask may only be stored under the
ambient conditions described (see "Tech-
nical data" on Page 22)

7.2 Disposal

Parts which are no longer usable can be
disposed of with domestic waste.

8 Troubleshooting

Fault Cause
Pain in the
face or on
Mask too
the nose
tight
from
pressure
Remedy
Adjust headgear and
modify position of
forehead support