Table of Contents
Advertisement
Chapter 4 - Operation and Administration
restoring the Suppression Intervals of all traps to the default value of 0 (no
suppression).
The Severity menu includes the following options:
Show Traps with Modified Suppression Interval: Displays all traps with
¢
Suppression Interval that differs from the default suppression interval, which
is 0 (no suppression).
Update: Enables modifying the Suppression Interval of a selected trap. The
¢
available range is from 0 to 86,400 (seconds). 0 means no suppression.
Restore Defaults: Enables restoring the Suppression Intervals of all traps to
¢
the default value (0).
4.4.4
Licenses
The License feature enables managing the license(s) granted to CPEs with limited
capabilities ("L model" CPEs) as well as the general Base Station licenses. In an "L
model" CPE, the overall throughput (the aggregate downlink and uplink MIR in all
services allocated to subscribers behind the CPE) is limited to 2 Mbps. The
Network Service Provider may purchase from the Supplier a bank of CPE
unlimited bandwidth licenses, and allocate licenses to selected L model CPEs on a
need basis (refer to
selected CPE). Rather then granting licenses only to specific L model CPEs, The
Network Service Provider may also purchase a Base Station unlimited bandwidth
license to override the bandwidth limitations of all L model CPEs served by the
Base Station. The various licenses (CPEs Unlimited Bandwidth Licenses Bank,
Base Station Unlimited Bandwidth License for all CPEs) are supplied as files to be
loaded to the Base Station using TFTP. A license file can be loaded only to the
Base Station specified in the applicable order.
The Licenses menu enables viewing the current status of CPEs and Base Station
Licenses. The available options are:
Show CPEs License Bank Status
¢
Show Base Station Licenses
¢
Show Temporary Grace Licenses
¢
Show Grace Licenses
¢
78
Section 4.9.6.3.9
for details on assigning a license to a
Operation
Advertisement
Table of Contents
