Figure 2-3: Au-Odu-Hp Pole Installation Using Special Clamps - Nera WiLink-I Series System Manual

2.1.4.3 Pole Mounting the AU-ODU-HP Using Clamps
Figure 2-3
pole, using the clamps and threaded rods.

Figure 2-3: AU-ODU-HP Pole Installation Using Special Clamps

NOTE
There is a groove on one end of the threaded rod. Insert the threaded rods with the grooves
pointing outward, as these grooves enable you to use a screwdriver to fasten the rods to the unit.
WiLink-I Modular Base Station System Manual
illustrates the method of mounting a High Power AU-ODU-HP on a
Installing the AU-ODU
29