Configuration; Figure 4-1: Base Station Chassis Slot Assignment - Nera WiLink-I Series System Manual

¯
Licenses Status
¢
¯
¯
For details refer to
4.4.2

Configuration

Select this option to view or configure the general Base Station parameters:
4.4.2.1 Device Name
The Device Name parameter provides identification information for the base
station equipment.
The device name consists of up to 255 printable characters.
The default Device Name is a null string (empty).
4.4.2.2 Device Location
The Device Location parameter provides location information for the Base Station
equipment.
The location name consists of up to 255 printable characters.
WiLink-I Modular Base Station System Manual
Ø Operational status (OK/Fault) of an installed module
PSU slots table, displaying the status of each slot: Not installed, OK or
Fault.
CPEs License Bank status
Base Station License Status
Section 4.4.4.

Figure 4-1: Base Station Chassis Slot Assignment

Base Station Menu
73