Table of Contents
Advertisement
Chapter 4 - Operation and Administration
NOTE
An SU that is defined as Temporary will be deleted from the database when it is disconnected.
4.9.2
Show Summary by AU
Select this option to view the total number of SUs connected to a specific AU as
well as main details on these SUs, as described in
prompted to select the required AU Slot ID.
4.9.3
SW Files in NPU
Up to three SU SW files can be stored in the NPU. Any of the available files can be
loaded by the NPU to a selected SU. When three SU files are stored in the NPU, a
new file cannot be added until at least one of the existing files is deleted. This
menu enables viewing the current SU SW files stored in the NPU and deleting
selected file(s). It also enables defining a Default SU SW File, which is the file to be
loaded to any new temporary SU when the Base Station operates in Quick Mode
in order to provide it with the defined Default Service(s). Refer to
for more information on Quick Mode and Default SU Profiles.
4.9.3.1
Show Files
Select this option to display the SU SW files currently stored in the NPU. For each
available SW file, the file name and the version number are displayed.
In addition, the Default SU SW File Name and Default Action are also displayed.
4.9.3.2
Default File Name
The Default File Name is the name of the SU SW file to be used for new temporary
SUs when operating in Quick Mode.
4.9.3.3
Default Action
The Default Action is the action to be taken with the Default SU SW File when a
new temporary SU joins the cell when operating in Quick Mode.
The available options are:
1 - None
2 - Download
3 - Run from Shadow
4 - Set as Main
122
Section
4.9.1. You will be
Section 4.10.1
Operation
Advertisement
Table of Contents
