Unit Control - Nera WiLink-I Series System Manual

¯
4.5.2

Unit Control

The Unit Control menu of the NPU enables changing the access Passwords and
the Monitor Inactivity Timeout, resetting the NPU, reverting the Base Station and
the NPU to the factory default configuration, managing the SW versions of the
module and creating backup files.
The Unit Control menu includes the following options:
Change Password
¢
Reset
¢
Set Factory Defaults
¢
SW Versions Control
¢
Create Backup
¢
Monitor Inactivity Timeout
¢
4.5.2.1 Change Password
For security and control reasons, the Change Password option is available only for
users with Administration access rights, using the Administrator Password to
access the program. The Change Password option enables defining the passwords
for each of the three different access levels: Administrator, Installer and Monitor.
After changing the password for a selected access level, you will be prompted to
re-enter the new password for confirmation.
NOTE
For security reasons, the passwords do not change after performing the Set Factory Defaults
operation. For the same reason, the passwords are not included in backup configuration files.
Valid passwords: Up to 16 printable characters, case sensitive.
The default passwords are:
WiLink-I Modular Base Station System Manual
Boot SW Version
NPU Menu
83