Figure 2-1: Au-Odu Pole Installation Using Special Clamps - Nera WiLink-I Series System Manual

2.1.4.1 Pole Mounting the Regular AU-ODU Using Clamps
Figure 2-1
the clamps and threaded rods.

Figure 2-1: AU-ODU Pole Installation Using Special Clamps

NOTE
There is a groove on one end of the threaded rod. Insert the threaded rods with the grooves
pointing outward, as these grooves enable you to use a screwdriver to fasten the rods to the unit.
WiLink-I Modular Base Station System Manual
illustrates the method of mounting a regular AU-ODU on a pole, using
Installing the AU-ODU
27