4.10.5 Defining Services - Nera WiLink-I Series System Manual

Chapter 4 - Operation and Administration
This Filtering Rule should be included in the L3/L4 Filtering Rules List of the
From Wireless Filtering. In addition, the following configuration should be defined
for the From Wireless Filtering Interface:
Active Rule Type: Layer 3/4
¢
Admin Status: Enabled
¢
Default Action: Deny
¢
4.10.4.11 MAC Addresses Deny List
The MAC Addresses Deny List menu enables viewing and editing the MAC
Addresses Deny List. This list is used to deny services to MAC Addresses behind
SUs. Uplink frames whose source MAC address matches any of the entries in the
list and downlink frames whose destination MAC address matches any of the
entries in the list will be discarded.
The MAC Addresses Deny List menu also enables viewing and resetting the MAC
Addresses Deny List Counters, which display for each of the entries in the list the
number of frames that were discarded because they match the entry,
accumulated since the last reset.

4.10.5 Defining Services

The process of defining completely new Services should be done "from bottom up",
as each entity in the process is defined using one or more "lower level" entities.
To define a new Service "from scratch":
Define the QoS profiles that should be available for the required Priority
1
Classifiers (Uplink/Downlink QoS Profiles) and for the required Forwarding
Rules (Multicast QoS Profile).
Define the Priority Classifiers that should be available for the required Service
2
Profiles. All QoS Profiles required for the Uplink/Downlink QoS profiles list
must be defined in advance.
Define the Forwarding Rules that should be available for the required Service
3
Profiles. The QoS Profiles required for the Multicast QoS Profile parameter
must be defined in advance.
170 Operation