Table 4-4: Automatic Association Of Channel 1 Upon First Power-Up - Nera WiLink-I Series System Manual

Chapter 4 - Operation and Administration
Admin Status (Enabled/Disabled)
¢
Tx Power: Applicable only to Channels associated with a defined ODU. The Tx
¢
Power in dBm configured in the ODU.
Associated Radio Cluster: The Associated Radio Cluster defined in the ODU.
¢
Upon first power-up of the Base Station, the channels are defined automatically,
as follows:
Associated ODU: Channel 1 of all AUs is automatically associated with an
¢
ODU:

Table 4-4: Automatic Association of Channel 1 Upon First Power-Up

For all other Channels (2-4) the Associated ODU is NA.
Downlink (Tx) Frequency (MHz): 3551.750
¢
Admin Status: Enabled for Channel 1, Disabled for all other Channels (2-4)
¢
4.8.4.3.3.2 Select
Use this option to select a Channel ID (1-4) to open the Channel # menu for
viewing or updating the Channel's parameters. The configurable Channel
parameters are:
Associated ODU: An ODU ID (1-24) of an already defined ODU.
¢
Downlink (Tx) Frequency (MHz): The Tx frequency in MHz, which must be in
¢
accordance with the selected Bandwidth (see
defined in the Frequency Bands File for the frequency band selected as the
114
AU Slot ID
AU Slot 1
AU Slot 2
AU Slot 3
AU Slot 4
AU Slot 7
AU Slot 8
AU Slot 9
ODU ID
1
2
3
4
5
6
7
Section 4.8.4.3.2.1) and the rules
Operation