Hardware component
Network Daughter Card
(NDC)
NOTE:
The preceding table provides a non-exhaustive list of FRUs that reflects the common top-level assembly parts.
System memory
The appliance supports DDR4 registered DIMMs (RDIMMs) and load reduced DIMMs (LRDIMMs). System memory holds the instructions
that are executed by the processor.
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2666 MT/s, 2400 MT/s, or 2133 MT/s depending on the following factors:
•
DIMM type (RDIMM or LRDIMM)
•
Number of DIMMs populated per channel
•
System profile selected (for example, Performance Optimized, or Custom [can be run at high speed or lower])
•
Maximum supported DIMM frequency of the processors
Your appliance contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into
six channels. In each channel, the release tabs of the first socket are marked white, and the second socket black.
V series
Customer
Field
Replaceable
Replaceable
Unit (CRU)
Unit (FRU)
No
Yes
P series
Customer
Field
Replaceable
Replaceable
Unit (CRU)
Unit (FRU)
No
Yes
S series
Customer
Field
Replaceable
Replaceable
Unit (CRU)
Unit (FRU)
No
Replacing and adding hardware
Yes
27