Firmware Upgrade Mode - ATEN CL3800 User Manual

CL3800 / CL3700 / CL3100 User Manual

Firmware Upgrade Mode

The CL3800 / CL3700 / CL3100's firmware upgrade mode can be accessed
one of two ways: by entering a hotkey sequence (see Hotkeys, page 40), or by
sliding the Firmware Upgrade Switch of the CL3800 / CL3700 / CL3100 to
RECOVER (see Upgrade Failed, page 48).
Note: In order to activate the Firmware Upgrade Mode using a hotkey
sequence, the firmware upgrade switch (see page 9) must be set to the
Normal position.
1. Turn off the power to the CL3800 / CL3700 / CL3100 using the power
switch located on the back side of the console.
2. Slide the firmware switch to RECOVER (see page 9).
3. Turn on the power to the CL3800 / CL3700 / CL3100 using the power
switch located on the back side of the console.
When the CL3800 / CL3700 / CL3100 is in Firmware Upgrade Mode, the Num
Lock, Caps Lock and Scroll Lock LEDs will continually flash on and off.
To exit the Firmware Upgrade Mode, see Exiting Firmware Upgrade Mode,
page 49.
44