ATEN CL3800 User Manual page 30

CL3800 / CL3700 / CL3100 User Manual
To rack mount the CL3800 / CL3700 / CL3100, do the following:
1. Attach the left and right L-shaped brackets to the back of the rack,
installing four screws in the brackets to secure them in place.
2. While one person inserts the unit into place by sliding its left and right side
bars into the left & right L-shaped brackets (on the rack), have a second
person screw the front brackets to the rack.
3. After the front brackets are secured, tighten all the screws.
Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7
cm at the back for the power cord and cable clearance.
20