Hotkeys - ATEN CL3800 User Manual

CL3800 / CL3700 / CL3100 User Manual

Hotkeys

Console selection is accomplished with the following hotkey combinations:
Combination
[Ctrl] [Alt] [Shift] [P] [C]
[Enter]
[Ctrl] [Alt] [Shift] [M] [A] [C]
[Enter]
[Ctrl] [Alt] [Shift] [S] [U] [N]
[Enter]
[Ctrl] [Alt] [Shift]
[u] [p] [g] [r] [a] [d] [e]
[Enter]
[Ctrl] [Alt] [Shift] [L] [Enter]
[Ctrl] [Alt] [Shift] [R] [Enter] Enable 2nd console, or external
[Ctrl] [Alt] [Shift] [L] [R]
[Enter] or
[Ctrl] [Alt] [Shift] [R] [L]
[Enter]
[Ctrl] [Alt] [Shift] [U] [M]
[Enter]
[Ctrl] [Alt] [Shift] [U] [P]
[Enter]
[Ctrl] [Alt] [Shift] [F4]
[Enter]
[Ctrl] [Alt] [Shift] [F11] [F]
[Enter]
[Ctrl] [Alt] [Shift] [F11] [L]
[Enter]
Note: 1. Press the keys in sequence – one key at a time. First [Ctrl], then [Alt],
then [Shift], etc.
40
Action
To select normal mode (pc, etc.).
To select Mac
To select SUN
Activates the Firmware Upgrade
Mode.
Note: this Hotkey sequence only
works when the firmware upgrade
switch (see page 44) is in the
Normal position.
Enable Local (LCD) console; Disable
2nd console or external console
video.
console video; Disable Local (LCD)
console.
Enable both consoles (default).
Configures the front USB Port to
mouse mode (Mouse functionality is
immediate upon switching to USB
mouse mode). (USB mouse mode
[U] [M] is the default)
Configures the front USB Port to
peripheral mode.
Print the switch's current settings via
a text editor or word processor.
Set the KVM port to USB full speed.
Set the KVM port to USB low speed.
Beeps LEDs
2 None
2 None
2 None
None 3
Flashing
when
upgrade
is in
process
2 None
2 None
2 None
2 None
2 None
None None
2 None
1 None