Connecting Up - Cl3800 - ATEN CL3800 User Manual

CL3800 / CL3700 / CL3100 User Manual

Connecting Up - CL3800

Refer to the example installation diagram in the next page as you perform the
following steps:
1. Plug the USB, audio and one of HDMI, DVI-D, or VGA connectors of a
KVM cable (either supplied with the unit, or purchased separately, see
Cables, page 5) into the KVM ports located in the CPU section on the rear
of the CL3800.
Note: The CL3800 supports speakers only. It does not support a
microphone. Connect the KVM cable's speaker jack (green) to the
CL3800's audio port.
2. Plug the keyboard, monitor, mouse and audio connectors of the KVM
cable into their respective ports in the Console Section of a KVM switch.
3. If you are installing an external console, plug your keyboard, monitor,
mouse and speakers into their respective ports in the Console Section of
the CL3800.
Note: The CL3800 supports an HDMI, DVI-D, or VGA external console
monitor, but only one video signal (HDMI, VGA, or DVI-D) can be
displayed at a time. The DVI monitor will display a DVI-D signal
only.
4. Plug the CL3800's power cord into the CL3800's power socket and into a
power source.
5. Turn on the power to LCD Console.
6. Power on your PC.
24