ATEN CL3800 User Manual page 32

CL3800 / CL3700 / CL3100 User Manual
3. While one person inserts the unit into place by sliding its left and right side
bars into the left and right L-shaped brackets (on the rack), have a second
person screw the front brackets to the front-L bracket.
The CL5800 LCD KVM shown
here is used as a schematic representation
of this step.
4. After the front brackets are secured, tighten all the screws.
Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7
cm at the back for the power cord and cable clearance.
22