CL3800 / CL3700 / CL3100 User Manual
Connecting Up - CL3100
Refer to the example installation diagram below as you perform the following
steps:
1. Plug one end of the KVM cable into the KVM ports located in the CPU
section on the rear of the CL3100.
Note: The CL3100 supports speakers only. It does not support a
microphone. Connect the KVM cable's speaker jack (green) to the
CL3100's audio port.
2. Plug the other end of the KVM cable into the Console Section of a KVM
switch.
3. If you are installing an external console, plug your keyboard, mouse,
monitor, and speakers (microphone not supported) into their respective
ports on the Console Section of the CL3100.
4. Plug one end of the CL3100's power cord into the CL3100's power socket,
and plug the other end into a power source.
5. Turn on the power to LCD Console.
6. Power on your PC.
28