Kelvion KBloc Operating Instructions Manual page 73

4.
Slacken off and remove the marked nuts along with the associated
washers and store them carefully.
5.
Slacken off and turn the marked nuts up to the end of the respective
threaded bolt.
6.
Secure the panel so it will not fall down.
!
Attach sufficiently dimensioned and undamaged lifting slings to the lif-
ting points / screw-in lifting eyes.
 The panel was secured against falling down.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Chapter 7
Maintenance
73