Kelvion KBloc Operating Instructions Manual page 32

Fastening a vertical-type K°Bloc delivered in upright position properly
WARNING
Danger of injury by heavy weight of K°Bloc!
The K°Bloc may slip off and fall down during transport when incorrectly
fastened. You may suffer serious injuries and bruises in such an accident.
 Never stand underneath suspended loads!
 Always use approved load holding devices with sufficient load-carrying
capacity!
 Always use approved lifting equipment with sufficient load-carrying capa-
city!
 Wear safety shoes at all times!
 Lift and lower the K°Bloc evenly and slowly. Transport the unit vertically
at all times!
 Never transport the K°Bloc at the threaded bolts!
 Fasten the load holding devices only at the marked fastening points for
transporting the K°Bloc!
 Never attach the lifting slings to the connections!
 Avoid any pendulum movements of the K°Bloc!
Carry out the following steps:
1.
Fit the following shackles:
one shackle at the transport lifting eye for the vertical K°Bloc of the

"single eye" version;
two shackles at the two transport lifting eyes for the vertical K°Bloc of

the "double eye" version;
two shackles at two opposite transport lifting eyes for the vertical

K°Bloc of the "crosswise double eye" version.
32
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016