Kelvion KBloc Operating Instructions Manual page 34

Transporting a vertical-type K°Bloc delivered in upright position to the place of instal-
lation
Carry out the following steps:
1.
Carefully lift the K°Bloc.
!
Make sure that you lift the K°Bloc only as high as necessary.
2.
Transport the K°Bloc carefully to its intended place of installation.
!
Make sure that you lift the K°Bloc only as high as necessary.
3.
Put down the K°Bloc carefully at its intended place of installation.
The vertical-type K°Bloc delivered in upright position has now arrived at its place
of installation.
34
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016