Kelvion KBloc Operating Instructions Manual page 49

3.
Lower the lifting equipment at the foot so that you can remove the two
shackles from the foot.
4.
Remove the corresponding shackles and round slings.
5.
Put down the K°Bloc carefully with the lifting equipment fastened to the
lifting eye.
The vertical-type K°Bloc delivered in horizontal position has now arrived at its
place of installation and has been set up.
Setting up a vertical-type K°Bloc delivered in horizontal position at the place of instal-
lation
Carry out the following steps:
1.
Remove the transport packaging, see section „5.3 Removing and
disposing of transport packaging" (page 30).
2.
For the vertical K°Bloc "double eye" and "crosswise double eye" type, fit
the second shackle at the opposite opening of the transport lifting eye.
3.
Guide one suitable round sling through the additionally fitted shackle.
4.
Hang the round slings onto the hook of the lifting equipment.
5.
Carefully lift the K°Bloc.
!
Make sure that you lift the K°Bloc only as high as necessary.
6.
Put down the K°Bloc carefully at its intended position.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Setting up and connecting the K°Bloc
Chapter 5
49