Table of Contents
Advertisement
IMPORTANT NOTE
Damage of K°Bloc by slackening off/removing the corner
bolts!
Simultaneous removal of one or more corner bolts may cause malfunctions
or damage to the K°Bloc.
Never remove or slacken off the corner bolts.
Carry out the following steps:
1.
Slacken off the marked nuts at the adjoining panels so that no play will
result.
!
Slacken off the nuts alternatingly, moving from the outside towards the
centre.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Chapter 7
Maintenance
71
Advertisement
Table of Contents
