Table of Contents
Advertisement
Setting up a vertical-type K°Bloc delivered in upright position at the place of installa-
tion
Carry out the following steps:
1.
Remove the transport packaging, see section „5.3 Removing and
disposing of transport packaging" (page 30).
2.
Carefully lift the K°Bloc.
!
Make sure that you lift the K°Bloc only as high as necessary.
3.
Put down the K°Bloc carefully at its intended position.
4.
Anchor the K°Bloc to the foundation, using suitably dimensioned bolts
and nuts.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Setting up and connecting the K°Bloc
Chapter 5
35
Advertisement
Table of Contents
