Kelvion KBloc Operating Instructions Manual page 43

3.
Hang the two round slings on each side into the respective hook of the
lifting equipment.
The horizontal-type K°Bloc delivered in horizontal position | special-design
K°Bloc has now been properly fastened to the lifting equipment.
Transporting a horizontal-type K°Bloc delivered in horizontal position | special-design
K°Bloc to the place of installation
Carry out the following steps:
1.
Carefully lift the K°Bloc.
!
Make sure that you lift the K°Bloc only as high as necessary.
2.
Transport the K°Bloc carefully to its intended place of installation.
!
Make sure that you lift the K°Bloc only as high as necessary.
3.
Put down the K°Bloc carefully at its intended place of installation.
The horizontal-type K°Bloc delivered in horizontal position | special-design
K°Bloc has now been transported to the place of installation.
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Setting up and connecting the K°Bloc
Chapter 5
43