Transporting The K°Bloc To The Place Of Installation And Setting It Up; Transporting And Setting Up A K°Bloc Delivered In Upright Position - Kelvion KBloc Operating Instructions Manual

5.4 TRANSPORTING THE K°BLOC TO THE
PLACE OF INSTALLATION AND SETTING IT
UP
This chapter gives you information on how to transport the K°Bloc to its
place of installation:
• Transporting and setting up a K°Bloc delivered in upright position
(page 31)
• Transporting and setting up a K°Bloc delivered in horizontal position
(page 36)
5.4.1 TRANSPORTING AND SETTING UP A K°BLOC
DELIVERED IN UPRIGHT POSITION
Requirement:

The K°Bloc is still packaged.
Tools required:

Lifting equipment with sufficient load-carrying capacity

Load holding devices (round slings with shackles) with sufficient load-
carrying capacity
K°Bloc – Fully welded plate heat exchangers - English Version 2.2 - 01.2016
Setting up and connecting the K°Bloc
Chapter 5
31